佳礼资讯网

 找回密码
 注册

ADVERTISEMENT

查看: 18406|回复: 121

我的Professional Interview (P.I.)面试题

  [复制链接]
发表于 7-10-2011 01:12 AM | 显示全部楼层 |阅读模式
本帖最后由 wlch 于 7-10-2011 01:14 AM 编辑

以下是我在20115Professional Interview (P.I)时,两位考官问我的问题!

土木工程系的。面试大约一个小时半。在此分享供大家参考:-

1) General

Where you come from?

What is your primary school andsecondary school?

Can you give some brief on yourworking experience?

Your company in 3 unit shop lot?

How many engineer?

How many draftspersons?

2) Piling

Regarding the project you submitted,what kind of foundation system you using?

Why didn’t mentioned the pileworking load in the drawings submitted?

Who determine and design thefoundation for this project?

Do you do the soil investigationwork?

How many bore holes have beenconducted?

Can you brief what you investigatedin the SI?

What kind of test you conduct?

What kind of chemical item fromground water can attack your pile?

How you determined the chemicalagent from SI?

Why you using spun pile instead ofR.C. square pile?

What are your criteria you selectedthe spun pile?

Do you know how the spun pileadvantage compare to R.C square pile is?

Can you brief us how is the squarepile been manufactured?

Beside this, what kind of pile youknow?

Do you know what is the different oftimber pile and bakau pile?

How you know this kind of pilingsystem?

What is the workshop title and whois the speaker?

3) Earthwork

How you design the earthworkplatform?

What you have been consider in theplatform level design?

Why you backfill the platform range3mRL – 7.5mRL?

Do you supervise your work?

How you make sure the earthworkworks have been done properly?

What kind of material to used forbackfilling?

Is that any kind of soil? How youjustify it?

How your can make sure thecontractor is using the sound earth?

You done any sieve analysis before?

How you differential sand silt andclay?

Do you read through thespecification?

Does your company have anyspecification?

Do you know what meaning of reducedlevel?

Do you know what the reduce levelbased on?

Do you know what is datum mean?

Do you done the survey course andpractical in your University?

Can you brief us how is the surveyto be conduct?

评分

参与人数 1人气 +10 收起 理由
phoonwa + 10

查看全部评分

回复

使用道具 举报


ADVERTISEMENT

 楼主| 发表于 7-10-2011 01:14 AM | 显示全部楼层
4) Design and detailing
How your structures design to support the hollow core slab?
What the r.c.nib didn’t shown in your beam r.c. profile?
Why the section profile is wrong but you are not checking?
How you design the r.c. nib?
Can you sketch the r.c. nib detailing?
What is the bars you using?
Why you detail the r.c. nib like this?
Do you know the shear is important when design the r.c. nib?
How you analysis and design the beam?
Do you design the beam manually before?
What your have to consider during the beam design?
Is the work draft by your draft person?
Do you still doing any drafting work in office?
Do you check the software design result?
How is your checking system?
Is the detailing generated from the software?

5) Steel work
Do you do any steel work design?
What code of practice you using?
What kind of work you done before?
Do your design work been constructed?
How about your steel work in current company?
How you analysis the roof truss?
What kind of steel you using?
Can you please give me the roof truss sizing which you design before?
How long with the span?
Can you draw out the force diagram for the truss?
Do you design the portal frame before?
Can you draw the moment diagram of portal frame with uniform load?
Can you draw the moment diagram of the roof truss structure supported by column?
How about the wind load added?
How is the moment diagram look like for the both condition?
How you define the support condition?
Can you draw out the free body diagram of column subject to the roof axial load and
wind load?
How you justify this kind of pin-pin condition is stable?
Do you have the steel design manual?

6) Basement
Do you design basement before?
How many storey high?
What kind of retaining system you using?
What you have to consider in the design?
Do you know the construction methodology?

7) Essay
Section B - Which set of essay question you obtained?
Do you prepare the answer for question by your own?
Which question you are confident to answer?
Section A – we are give you this question “please briefly descript the procedure of
detail design for the work you undertaken from conceptual to implementation stage?”
quickly tell us what the content you will write for this essay?

评分

参与人数 1人气 +5 收起 理由
stevesing7837 + 5 谢谢分享。

查看全部评分

回复

使用道具 举报

发表于 7-10-2011 08:53 AM | 显示全部楼层
谢谢楼主分享。。。。。
回复

使用道具 举报

发表于 9-10-2011 06:03 PM | 显示全部楼层
你这样厉害哦, 所有问题都记住!!!你进错行业了,应该倒间谍系!!!!包你前途无量!
回复

使用道具 举报

 楼主| 发表于 11-10-2011 08:54 PM | 显示全部楼层
回复 4# winnithepooh

是当天面试后马上记录下来的,也有一小部分忘了。

回复

使用道具 举报

 楼主| 发表于 13-10-2011 08:53 PM | 显示全部楼层
回复 6# 他旺

我遇到的是technicalman
很老了,还是打工的,所以问题较多,还差一点把我fail掉。

我朋友遇到老板级的,也是随便问问就放人了。

回复

使用道具 举报

Follow Us
发表于 14-10-2011 09:55 AM | 显示全部楼层
没有关于highway的吗?
回复

使用道具 举报

发表于 14-10-2011 01:49 PM | 显示全部楼层
回复  他旺
我遇到的是technicalman,
很老了,还是打工的,所以问题较多,还差一点把我fail掉。我朋友遇 ...
wlch 发表于 13-10-2011 08:53 PM



   
我的PI时间只有半小时而已,他们在翻阅了我的报告后,就直接叫我describe the air conditioning system that you have designed for this project。之后的问题都是关于设计与管理方面的。他旺 发表于 13-10-2011 01:32 PM


看你们这样讲,Ir其实不难拿到?
回复

使用道具 举报


ADVERTISEMENT

 楼主| 发表于 14-10-2011 11:01 PM | 显示全部楼层
回复 8# 幸运☆宝宝

考官是根据我们呈交的经验和报告问问题。我没有做过highway的,所以没问。

回复

使用道具 举报

发表于 14-10-2011 11:04 PM | 显示全部楼层
回复 10# wlch

哦~明白了。那请问大大您对highway知识ok吗?我的意思是。。还记得学过的东西吗?如果有这方面问题,可以请教您吗?
回复

使用道具 举报

 楼主| 发表于 14-10-2011 11:42 PM | 显示全部楼层
回复 11# 幸运☆宝宝


FYP是关于Highway的吗?你可以问我,但是我未必会。若有问题,你也可以在工程设计这板块开帖,看看有没有人会回复你。

回复

使用道具 举报

发表于 14-10-2011 11:50 PM | 显示全部楼层
回复 12# wlch

感激不尽~至少有个人愿意回答我的问题了。谢谢你。不是fyp我还是3rd year。highway的project出了。我没有合的来的组员。所以很大可能性要自己做完。。如果我会的话,我当然很愿意自己做。问题是。。我很笨~什么都不会。所以想请教高人。以免presentation时到shoot.
回复

使用道具 举报

 楼主| 发表于 16-10-2011 07:03 PM | 显示全部楼层
回复 15# 他旺

你应该多鼓励年轻人早点去P.I.

我本人觉得四年经验就应该去尝试了。可以看到五年经验就P.E.的也相当多。

最重要是英文要好,清楚明白自己所做过的,和有信心的应答,就可以了。

回复

使用道具 举报

 楼主| 发表于 16-10-2011 07:05 PM | 显示全部楼层
回复 13# 幸运☆宝宝

你是哪一间大学的?别担心啦,只要有准备,Presentation的时候是没问题的。

回复

使用道具 举报

发表于 16-10-2011 09:18 PM | 显示全部楼层
回复 17# wlch


   pm跟你说
回复

使用道具 举报

 楼主| 发表于 17-10-2011 01:35 PM | 显示全部楼层
回复 19# 他旺

我很认同你说的要完全掌握一方面的知识与拥有足够的经验,要8年左右的时间才足够。

但是我的看法如下:-

1.年轻人应该要有大方向,一毕业入行后就必须开始准备P.E.,才会做事认真。

2. P.E.是一个短期目标,越早完成越好,人生还有很多大目标等待你去完成。

3.掌握知识和经验是长期累积的,而且学无止境,没有足够的。

4.当年轻人准备考试时候,将会参与很多必修课程(PDP),从中可以早点明白这行业的一些专业知识和操守,当在职接触时就能有所体会。

5.当你成为P.E.后,身边的人对你的期望有所不同,责任也大了,你将会不断的提升自己(CPD),处理问题时将会较成熟。

6.而且BEM基本条件只是需要3年相关的工作经验。

成功率可以看看IEMDirectory:- http://www.myiem.org.my/member/directory/

Grade:member; Graduate Year: 2006 or 2007

通过P.I.的也相当多了。

回复

使用道具 举报


ADVERTISEMENT

 楼主| 发表于 18-10-2011 01:50 PM | 显示全部楼层
怎么只有我们两人在讨论,没人参与?
我完全认同你的说法,但是有点保守。
如果要早早去考试,就必须有所准备,才不会失败。
P.E.才是工程师的开始,才会知道工程师的真正意义。
回复

使用道具 举报

发表于 18-10-2011 05:37 PM | 显示全部楼层
这里的PE不多,所以人家不感兴趣,也不是每一个工程系毕业生都想考。PE是对自己专业能力的认可,还有对自己专业的负责。
回复

使用道具 举报

 楼主| 发表于 18-10-2011 10:28 PM | 显示全部楼层
回复 23# 他旺

可见的你肯定经验+信心+能力都具备了,才去考试的。

既然你是P.E.,所写的每一句都具有责任和代表性的。

很都人没有想法去考取,因为他们没有心理准备,也不知道它的意义。

所以我觉得应该多多分享,多多鼓励,对吗?

当然八年经验才算思想+能力成熟,但是如果可以提早完成,应该用心的去行动。

你是哪一年考取的?

回复

使用道具 举报

发表于 19-10-2011 10:27 AM | 显示全部楼层
本帖最后由 他旺 于 19-10-2011 10:30 AM 编辑
回复  他旺

可见的你肯定是经验+信心+能力都具备了,才去考试的。既然你是P.E.,所写的每一句都具有责任 ...
wlch 发表于 18-10-2011 10:28 PM




我觉得每个人都有他自己的想法咯,要不要考,是他个人的自由。至于要不要鼓励,只要一个人有了信心与能力,那就可以,不需要人家去多事。再问你一次,你是不是PE了?
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

 

ADVERTISEMENT



ADVERTISEMENT



ADVERTISEMENT

ADVERTISEMENT


版权所有 © 1996-2023 Cari Internet Sdn Bhd (483575-W)|IPSERVERONE 提供云主机|广告刊登|关于我们|私隐权|免控|投诉|联络|脸书|佳礼资讯网

GMT+8, 30-11-2024 09:29 AM , Processed in 0.128268 second(s), 25 queries , Gzip On.

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表