Samsung Galaxy I9000 超简易更换电池状态-Froyo （2.1/JPE可以用了，测试着DXJPA）

Sanctuary

回复 20# angeluslee


    2.1，運行沒問題，放心。
在recovery mode，update.zip的方法過就行了。

guohui

用2.1的千万别试，刚刚因为某些原因被刷回去2.1，所以试一下可以没有，
结果开机一直停在i9000 开机画面！
angeluslee 发表于 21-10-2010 04:28 PM

    请问下你用KIES刷回2.1？要怎样刷？

angeluslee

回复 21# Sanctuary


   因为我是用copy and paste的方式=)好，我会在第一面加上去

Sanctuary

回复 23# angeluslee


    Copy and paste就是我失敗的經驗。
不會hang，但是market進不到，email進不了，然後一直crash……

angeluslee

回复 24# Sanctuary


   哈哈谢谢你分享你的经验。我的是开机一直停在main screen，连进去也不可以。。。。
那么你不是要重刷咯？

Sanctuary

回复 25# angeluslee


    有一個code，是可以做到factory format(不是factory reset，有試過factory reset解決不了問題)。
Root的狀態還在，其他東西，包括internal SD都乾乾淨淨，再做lagfix就行了，restore/install apps就行了。

當時是想，反正都是system crash了，如果format也不行就刷的。
既然可以，我又不想刷了。

angeluslee

回复 26# Sanctuary


   什么code？意思是说如果是factory format，会完全清干干？只保留原有system？

紅慧星馬沙

回复  Sanctuary


   什么code？意思是说如果是factory format，会完全清干干？只保留原有system？
angeluslee 发表于 22-10-2010 11:33 AM

i9000 Secret Codes

*#*#4636#*#* for battery and other general setttings like GSM/CDMA
*#*#8255#*#* for Gtalk service monitor
*#*#7780#*#* for factory data reset
*#*#34971539#*#* for information about phone camera (be very careful hitting options here)
*#*#7594#*#* change the "Power" button action in your phone.
*#*#197328640#*#* service mode
*#197238640# service mode
*#0*# testing mode
*#1234# display phones current firmware
*#*#1472365#*#* gps test
*#0011# network mode/cell info/power info
*#*#0*#*#* screen test menu
*#7465625# engineering mode
*#3214789650# gps service menu for JP3 fw
*#9900# Sysdump screen.. some sort of way to dump ram and other logs to sd card
*2767*3855# FACTORY DATA WIPE AND internal SD RESET as soon as you enter # use only if you want wipe your phone
*#*#273283*255*663282*#*#* Opens a File copy screen where you can backup your media files


New Froyo Codes !!!

*#1234# (View SW Version PDA, CSC, MODEM)
*#12580*369# (SW & HW Info)
*#197328640# (Service Mode)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#7780# (Factory Reset)
*2767*3855# (Full Factory Reset)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
*7465625*782*# (Configure Network Lock NSP)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)

*#272*imei#* Product code , works on Froyo

Sanctuary

回复 27# angeluslee

   #28 highlighted了。
多謝馬沙~

angeluslee

wa sai~~~~~

angeluslee

回复 26# Sanctuary

那个factory format好像不行，一直停在那个screen吧了。。。

Sanctuary

回复 31# angeluslee


    換囘原裝的framework-res.apk，再試。
用著改過的好像會有你那個情況，不會跑。

口报总编

暂时觉得我在用的不错rfrf

guohui

暂时觉得我在用的不错rfrf
口报总编 发表于 24-10-2010 11:30 PM

    用Widget的话，会一直有一个process在background跑，间接的比较耗电。如果用ATK杀掉那个process的话，Widget又不会update。

angeluslee

其实不太喜欢太多widget

celineyu

用2.1的千万别试，刚刚因为某些原因被刷回去2.1，所以试一下可以没有，
结果开机一直停在i9000 开机画面！
angeluslee 发表于 21-10-2010 04:28 PM

救命！我的是2.1的，我错用你2.2的方法做了后，开机就一直停在i9000 开机画面。而且我的是锁三键的。

怎么办？？？

guohui

救命！我的是2.1的，我错用你2.2的方法做了后，开机就一直停在i9000 开机画面。而且我的是锁三键的。 ...
celineyu 发表于 7-11-2010 02:51 AM

    你有打开usb debugging吗？有的话用adb进入recovery模式。

celineyu

你有打开usb debugging吗？有的话用adb进入recovery模式。
guohui 发表于 7-11-2010 11:12 AM

    没有开usb debugging。 我试了 adb 和 odin3 都 detect 不到 device。

还有别的方法吗？？？

紅慧星馬沙

回复 38# celineyu


    去找三叔

guohui

没有开usb debugging。 我试了 adb 和 odin3 都 detect 不到 device。

还有别的方法吗？？？
celineyu 发表于 7-11-2010 11:18 AM

    唯一的方法是送厂了……
没有开usb debugging的话，adb和odin都detect不到的。

试试看这个

In order to get out of the Recovery Mode, please follow the steps below:
Recovery Process

1.Remove the battery and reinstall it. Power On your Phone
- Phone display “Connection picture for Phone to PC”

2. Recovery Mode in Kies
If upgrade failed in upgrade step, you can see next Pop-Up
- Select "Yes”
Firmware Upgrade program progress to recovery mode.

3. Select "Recovery" button.

4. Read the caution and check “all information has been verified”
- After this, it’s same with Firmware update Process

5. Click “Next”
- Firmwareversion display
- Firmware file is downloaded to PC

6. Firmware update
- After Firmware downloaded, Click “Next”
- Firmware update start
Caution
- Never disconnect or turn off the
device in thisstep
- If so, recover the phone refer to
recovery section

7.Complete
- After Firmware update complete, the device reboot
automatically
- Click “Next” Button

To do this manually instead of using Kies, please click on the Power
button, the Volume down button and the middle button all together all at
the same time. The phone would flash for 2 times, and on the 3rd time,
please remove your hands fromthe phone, and it should boot up normally.